Precor C954 Owner's Manual page 11

C O M M E R C I A L P R O D U C T S D I V I S I O N
Diagram 3
Diagram 4
Lift the rear of the
unit and roll it to
its assembly
location.
Rear end
cap-"itt-tr--"'l:::==;;;;t".....
9
Lift the unit
by'--f--+--""T""----r==r
grasping the
hand holds
inside the rear
end caps.
3. Move the treadmill.
Diagram
3.
Grasp the hand holds inside the rear end
caps and use proper lifting techniques to lift the rear end so that you can roll
the treadmill on its front wheels. To avoid injury to yourself or damage to the
unit, ask for help in placing the treadmill where you plan to use it.
Remove the
hood.
Front screw
--~-\---:
Hood----+_
Side screw
--+--------:l\o-----
4. Remove
the hood.
Diagram 4.
Loosen
and
remove
the four buttonhead
screws
using the 3116-inch hex key. Inset #1 shows the location of one of the front
screws. Inset #2 illustrates the location of the side screw. The other is on the
opposite side. Lift the hood off the treadmill and set it aside.
page
11