Lubricant Specifications - Ford F250 Owner's Manual

4
Service refill capacity is determined by filling the transmission to the
bottom of the filler hole with the vehicle on a level surface. The 6–speed
manual transmission is equipped with an in-tank cooler. Verify the fluid
level after operating vehicle to assure correct fluid level.
5
Indicates only approximate dry-fill capacity. Some applications may vary
based on cooler size and if equipped with an in-tank cooler. The amount
of transmission fluid and fluid level should be set by the indication on
the dipstick's normal operating range.
6
Use of synthetic or synthetic blend motor oil is not mandatory. Engine
oil need only meet the requirements of Ford specification
WSS-M2C153–H and the API Certification mark.

LUBRICANT SPECIFICATIONS

Ford part
Item name or
equivalent
High
Temperature
Spindle bearing 4X4 Front Axle
and Wheel
Bearing Grease
Motorcraft SAE
Front axle 80W-90
(4X4) Premium Rear
Axle Lubricant
2004 F250/350/450/550 (f23)
Owners Guide (post-2002-fmt)
USA English (fus)
Maintenance and Specifications
Ford part
number
E8TZ-19590–A
XY-80W-90–QL
Ford
specification
ESA-M1C198–A
WSP-M2C197–A
287