Checking And Adding Transfer Case Fluid (If Equipped); Driveline Universal Joint And Slip Yoke - Ford F250 Owner's Manual

Maintenance and Specifications

Checking and adding transfer case fluid (if equipped)

1. Clean the filler plug.
2. Remove the filler plug and
inspect the fluid level.
3. Add only enough fluid through
the filler opening so that the fluid
level is at the bottom of the
opening.
Use only fluid that meets Ford specifications. Refer to Lubricant
specifications in this chapter.

DRIVELINE UNIVERSAL JOINT AND SLIP YOKE

Your vehicle may be equipped with universal joints that require
lubrication. Refer to the Scheduled Maintenance Guide for
maintenance intervals. If the original universal joints are replaced with
universal joints equipped with grease fittings, lubrication will also be
necessary.
266
2004 F250/350/450/550 (f23)
Owners Guide (post-2002-fmt)
USA English (fus)