Ford F-150 Owner's Manual page 306

Maintenance and Specifications
The transmission fluid should be in
this range if at normal operating
temperature (150°F-170°F
[66°C-77°C]).
The transmission fluid should be in
this range if at ambient temperature
(50°F-95°F [10°C-35°C]).
High fluid level
Fluid levels above the safe range
may result in transmission failure.
An overfill condition of transmission
fluid may cause shift and/or
engagement concerns and/or
possible damage.
High fluid levels can be caused by
an overheating condition.
Adjusting automatic transmission fluid levels
Before adding any fluid, make sure the correct type is used. The type of
fluid used is normally indicated on the dipstick. Refer to Lubricant
specifications in this chapter.
Use of a non-approved automatic transmission fluid may cause
internal transmission component damage.
If necessary, add fluid in 1/2 pint (250 ml) increments through the filler
tube until the level is correct.
If an overfill occurs, excess fluid
should be removed by an authorized
dealer.
306
2006 F-150 (f12)
Owners Guide (post-2002-fmt)
USA (fus)
COLD FoMoCo 5L 3P -7A020- CB
COLD FoMoCo 5L 3P -7A020- CB
COLD FoMoCo 5L 3P -7A020- CB
COLD 5L 3P -7A020- CB
FoMoCo