Lubricant Specifications - Ford Ranger Owner's Manual

Maintenance and Specifications
2
Indicates only approximate dry-fill capacity. Some applications may vary
based on cooler size and if equipped with an in-tank cooler. The amount
of transmission fluid and fluid level should be set by the indication on
the dipstick's normal operating range.
3
Service refill capacity for the manual transmission is determined by
filling the transmission to the bottom of the filler hole with the vehicle
on a level surface.
4
Add the coolant type originally equipped in your vehicle.
5
Traction-Lok axles use 2.2–2.4L (4.75–5.0 pints) of rear axle lubricant.
6
Add 4 oz. (118 ml) of Additive Friction Modifier XL–3 or equivalent
meeting Ford specification EST-M2C118–A for complete refill of
Traction-Lok axles.
Service refill capacities are determined by filling the rear axle 1/4 inch to
9/16 inch (6mm to 14mm) below the bottom of the filler hole.
7
Use of synthetic or synthetic blend motor oil is not mandatory. Engine
oil need only have the API Certification mark and meet the requirements
of Ford specification WSS-M2C929-A (4.0L) or WSS-M2C930-A (2.3L and
3.0L).

LUBRICANT SPECIFICATIONS

Ford part
Item name or
equivalent
Motorcraft SAE
Front axle 80W-90
(4X4) Premium Rear
Axle Lubricant
Motorcraft SAE
80W-90
Rear axle
Premium Rear
Axle Lubricant
Motorcraft SAE
Rear axle (FX4 75W-140
Level II only) Synthetic Rear
Axle Lubricant
240
2006 Ranger (ran)
Owners Guide (post-2002-fmt)
USA (fus)
Ford part
number
XY-80W90-QL
XY-80W90-QL
1
XY-75W140–QL
1
Ford
specification
WSP-M2C197-A
WSP-M2C197-A
WSL-M2C192–A