Sony Alpha ILCE-7 Help Manual page 140

Help Guide
How to Use
Interchangeable Lens Digital Camera
ILCE-7/ILCE-7R
Manual Exposure
You can shoot with the desired exposure setting by adjusting both the shutter speed and aperture. The shutter
speed and the aperture value can be changed while recording movies.
1. Set the mode dial to M (Manual Exposure).
2. Select the desired aperture value by turning the front dial.
Select the desired shutter speed by turning the rear dial.
When [ISO] is set to other than [ISO AUTO], use MM (Metered Manual) to check the exposure value.
Toward +: Images become brighter.
Toward − : Images become darker.
0: Appropriate exposure analyzed by the product
3. Adjust the focus and shoot the subject.
Note
When [ISO] is set to [ISO AUTO], the ISO value automatically changes to achieve the appropriate exposure
using the aperture value and shutter speed you have set. If the aperture value and shutter speed you have
set are not suitable for appropriate exposure, the ISO value indicator will blink.
The Metered Manual indicator does not appear when [ISO] is set to [ISO AUTO].
When the amount of ambient light exceeds the metering range of the Metered Manual, the Metered Manual
indicator flashes.
The /
The brightness of the image on the monitor may differ from the actual image being shot.
Hint
You can change the shutter speed and aperture (F-value) combination without changing the set exposure
value by rotating the front/rear dial while pressing the AEL button. (Manual shift)
(SteadyShot warning) indicator does not appear in manual exposure mode.
Notes on use
4-484-060-11(1)
Copyright 2013 Sony Corporation
Find
140