Sony Bravia KDL-55W900A I-Manual page 83

This TV does not support interlaced signals.
For optimum picture quality, it is recommended that you use the signals in
the chart. In plug and play, signals with a 60 Hz vertical frequency will be
detected automatically. (PC reboot may be necessary.)
Depending on the connection status, image may be blurred or smeared. In
this case, change the PC's settings, then select another input signal in
"Corresponding PC input signal".
1920 pixel x 1080 line/60Hz output may not be available, depending on
your PC. Even if you 1920 pixel x 1080 line/60Hz output is selected, the
actual output signal may differ. In this case, change the PC's settings, then
select another input signal in "Corresponding PC input signal".
Top of Page
© 2013 Sony Corporation List of Contents
83