Sony Bravia KDL-55W900A I-Manual page 163

compatible device.
In the case of a Wi-Fi compatible device, press the OPTIONS button,
then select [Manual].
7.
Operate the Wi-Fi Direct/Wi-Fi compatible device to connect with the
TV.
8.
Send the content from the Wi-Fi Direct/Wi-Fi compatible device to
the TV.
For details, refer to the instruction manual of the device.
If the connection does not succeed
When the standby screen for the Wi-Fi Direct Settings is displayed,
press the OPTIONS button, then select [Manual].
Select [WPS (Push Button)] if the device supports WPS. Otherwise,
select [Other Methods] and follow the on-screen instructions to
complete the setup.
To connect another device
Follow the steps above to connect devices. Up to 8 devices can be
connected at the same time. To connect another device when 8 devices
are already connected, disconnect an unnecessary device, then connect
the device.
To change the name of the TV shown on the connected
device
Press the HOME button, then select [Settings] →
[Device Name].
To list connected devices/deregister devices
When the standby screen for the Wi-Fi Direct Settings is displayed,
press the OPTIONS button, then select [Show Device List / Delete].
To deregister a device, select the device in the list to delete, then press
the button. Then, select [Yes] in the confirmation display.
To deregister all devices, press the OPTIONS button in the list, select
[Delete All], then [Yes] in the confirmation display.
Icons on the left of the list show the following.
(check icon): Connected devices
(display icon): Screen mirroring compatible devices
To display dialog when attempting to connect a device
with the TV
Activating this function can avoid an unintended device from being
connected.
When the standby screen for the Wi-Fi Direct Settings is displayed,
press the OPTIONS button, then select [Registration Notification].
Note that once you decline registration request from a device, you will
not be able to connect the device unless you delete it from the device
163
[Network] →