Memory; Overview; Dimms Supported; Dimm Slots - Dell PowerEdge T110 II Technical Manual

7 Memory

7.1 Overview

The PowerEdge T110 II supports DDR3 memory, providing a high performance, high-speed memory
interface capable of low latency response and high throughput. The T110 II supports unbuffered ECC
DDR3 DIMMs (UDIMM).
Key features of the T110 II memory system include:

2 channels per processor

Support for UDIMM ECC DDR3 DIMMs

DDR3 speeds of 1066/1333/1600MT/s

4 DIMM sockets (32GB maximum capacity)

Support for single-rank and dual-rank DIMMs

7.2 DIMMs Supported

The T110 II supports the following DIMM types:

1GB, DDR3 UDIMM, 1333/1600 with ECC

2GB, DDR3 UDIMM, 1333/1600 with ECC

4GB, DDR3 UDIMM, 1333/1600 with ECC

8GB, DDR3 UDIMM, 1333/1600 with ECC

7.3 DIMM Slots

The PowerEdge T110 II has four 72-bit (240-pin) DIMM slots for memory, supporting up to 2 DIMMs per
channel. The modules are configured as 72 bits wide to provide for ECC. The memory controller in
the processor performs the ECC.

7.4 Speed

The PowerEdge T110 II supports up to 1600MT/s DDR3 memory.

7.5 Sparing

Memory sparing is not supported.

7.6 Mirroring

Memory mirroring is not supported.

7.7 RAID

Memory RAID is not supported.

7.8 Supported Configurations

Supported memory configurations for the T110 II are listed in Table 9. For the latest information on
memory options, visit Dell.com.
PowerEdge T110 II Technical Guide 25