Programming Scan List; Programming Weather Channel - Motorola RMU2080d User Manual

Programming Scan List

You can enable or disable the Channel
Scanning feature for each channel in your
radio. To do so, enter the Advanced
Configuration Mode and select the channel you
want to program. Scroll through the
programming modes by short pressing the PTT
button or
the 'Scan Programming Mode'.
The radio display shows the Scan
Programming Mode as follows:
Both the channel number and current scan
setting (YES = Enable or NO = Disable) blinks
on the display, indicating you can choose your
setting. To set the channel number, rotate the
Channel Selector Knob until you reach the
desired channel number.
44
English
(Menu) button until you reach
Once you have selected the channel, proceed
to enable ('YES') or disable ('NO') the scan
feature by pressing the SB2 (*) button. Once
you have set the values you need, long press
the PTT button to exit and save, or short press
the PTT button to move to the next
programming feature without saving.
Note:
• (*) This assumes the SB2 button is not
programmed for a different mode.
• If the Maximum Channel setting in the radio is set
to '1', the Scan Programming option is disabled
and will not show on the radio display.

Programming Weather Channel

Weather Channel Programming Mode is the
last programming mode available. You can
enable or disable the Weather Channel.
To do so, enter the Advanced Configuration
Mode and select the channel you want to
program. Scroll through the programming
modes by short pressing the PTT button or