Setting Vox Sensitivity; Microphone Gain; Battery Save; Reset To Factory Defaults - Motorola RMU2040 User Manual

Setting VOX Sensitivity

The sensitivity of the radio's accessory or
microphone can be adjusted to suit different
operating environments. VOX sensitivity can
be programmed via the CPS.
Default value is OFF. If you want to use the
VOX feature, VOX level should be set at a
value different from OFF.
1 = Low audio input levels will trigger the Tx
•
• 2 = Medium sensitivity
3 = High audio input levels will trigger the Tx
•

Microphone Gain

The sensitivity of the microphone can be
adjusted to fit different users or operating
environments.
This feature can be adjusted only through the
CPS. Microphone default setting is set to 2 =
Medium Gain.
32
English

Battery Save

Battery Save feature extends battery life as
your radio goes into 'Idle' state. To enable/
disable press SB1 and SB2 buttons
simultaneously for 2 or 3 seconds while
powering up the radio until you hear a quick
series of beeps. To have a slightly better attack
time, set Battery Save feature to OFF so that
the radio is always ready to transmit or receive
without any delays.
Note:
Battery Save feature is set to ON by default

Reset to Factory Defaults

Reset to Factory Defaults will set back all radio
features to the original factory default settings.
To do so, press PTT, SB2 and SB1
simultaneously while turning ON the radio until
you hear a high tone chirp.