Motorola RMU2080 User Manual page 25

Charging a Radio and Battery using
a Multi Unit-Charger - MUC (Optional
Accessory)
Charging Contacts
Charging Indicator
The Multi-Unit Charger (MUC) allows drop-in
charging of up to 6 radios or batteries. Batteries
can be charged with the radios or removed and
placed in the MUC separately. Each of the 6
charging pockets can hold a radio (with or
without the Holster) or battery, but not both.
Charger Power Receptacle
Charging Pocket
1. Place the Multi-Unit Charger on a flat surface.
2. Insert the power cord plug into the MUC's dual
pin connector at the bottom of the MUC.
3. Plug the power cord into an AC outlet.
4. Turn the radio OFF.
5. Insert the radio or battery into the charging
pocket with the radio or battery facing away
from the contacts.
Note:
• This Multi-Unit Charger clones up to 2 radios (2
Source radios and 2 Target radios). Refer to
"Cloning with a Multi Unit Charger (MUC)" on
page 47 for more information.
• More information on the Multi-Unit Charger's
operation is available in the Instruction Sheets
provided with the MUC. For more information on
the parts and their part numbers, refer to Chapter
"Accessories" on page 74.
23
English