Connecting And Configuring Monitors - HP Z220 SFF User Manual

Connecting and configuring monitors

NOTE:
The graphic cards that HP supports typically allow at least two monitors, as shown in this
section; some supported cards allow more monitors. Refer to the graphics card documentation for
details.
1.
Connect the monitor cable adapters (1) (if required) to the workstation, then connect the
appropriate monitor cables to the adapters (2) or directly to the graphics card.
Figure 3-4
2. Connect the other ends of the graphics cables to the monitors.
Figure 3-5
3. Connect one end of the monitor power cord to the monitor and the other end to a grounded
power outlet.
4.
Configure the monitor. For details, refer to Microsoft Help or to http://www.microsoft.com, or to
your Linux Help or website.
26 Chapter 3 Setting up the workstation
Connecting the cables to the workstation
Connecting cables to the monitors