Page 1
GRASS COLLECTION SYSTEM DESIGNED FOR: MODEL 89201800 GRAVELY 200 SERIES MOWER OPERATOR S MANUAL ASSEMBLY OPERATION MAINTENANCE MANUAL PART#: 00191300 (Q0314) $4.00 REV:...
WARNING! NEVER operate the unit unless the discharge guard and either the deflector assembly or the vacuum collector adapter are fastened securely in place. WARNING! Do not work around the mower deck boot or the blower area until you are certain that the mower blades and the blower impeller have stopped rotating.
INTRODUCTION AND DESCRIPTION 1-1 Introduction We are pleased to have you as a Gravely customer. Your collection system has been designed to give you a low maintenance, simple, and effective way to collect the grass clippings from your mower. This manual is...
2-2 Attaching Lower Frame Legs Remove the (3) bolts (Figure 3) from each side of the rear of the mower. Keep the bolt, from each side, that threads through the mower’s rear frame. Place the left lower main frame leg P#(00197700) onto the rear of the mower and fasten by using (2) 3/8”-16 x 3”...
Figure 7 Safety Interlock Harness Connections Figure 8 Wiring Diagram 2-3 Attaching The Top Main Frame Assembly Place the top main frame assembly P#(00197800) (Figure 9) onto the main frame legs and fasten each side by using (1) 3/4”-10 x 1-1/2” HHCS P#(05959600), (1) 3/4”-10 nyloc nut P#(06540800), (1) ½”-13 x 1”...
2-5 Attaching The Aluminum Grass Container To The Unit NOTE: IT IS RECOMMENDED THAT 3 PEOPLE ASSIST IN MOUNTING THE CONTAINER. With three people available, two can lower the container onto the frame while the third person inserts the pivot pins P#(K0172) through the holes.
2-8 Belt Installation Loosen the (2) bolts that secure the gear box assembly P#(00197300) to the pto mount plate (Figure 15). Loosen the adjustment bolt P#(05942200) until the gear box assembly is at its far left adjustment (the gear box is moved towards the mower’s engine pulley).
Mower Deck Figure 18 Deflector Shield Mount Boot Hanger Boot Rod Boot Plate 2-11 Adjustment Of The Lengths Of The Hoses The hoses in steps 2-12 and 2-13 must be cut to fit your machine. Follow steps 2-12 and 2-13. Do not cut the hoses until you have tried to fit them on your machine.
2-16 Final Checks To check the operation of the safety interlock harness perform the following: A. Start mower B. While seated in the operator’s seat, rotate the engagement handle of the collection system away from the mower. C. With the blower engaged, stand up from the operator’s seat.
SECTION V PARTS AND SERVICE 5-1 Parts And Service Information Gravely collection system owners should record the name and telephone number of their Service Center. Your Service Center will be happy to supply replacement parts, accessories, and do any service or repairs to your collection system.
To promote safe operation, Gravely supplies safety decals on all products manufactured. Damage can occur to safety decals either through shipment, use or reconditioning. Contact your local Service Center for replacement decals. Part #: 05360200 Part #: 05360600 Part #: 05360900...
Page 18
GRAVELY A Division of Ariens Company 655 West Ryan Street P.O. Box 157 Brillion, WI 54110-0157 920-756-2141 Fax 920-756-2407 www.gravely.com...