Replacing The Memory Module - Lenovo ThinkPad T430u User Manual

8. Connect the cables to the new PCI Express Mini Card
the card 2 .
Note: Depending on the model, the marking for the connectors on your card might look slightly
different from the illustration above. If the connectors on your card are marked as "MAIN" or "M" and
"AUX" or "A," be sure to attach the red cable to the "MAIN" or "M" connector, and the blue cable to
the "AUX" or "A" connector.
9. Reinstall the keyboard. For more information, refer to "Replacing the keyboard" on page 77.
10. Turn the computer over again. Connect the ac power adapter and cables to the computer.

Replacing the memory module

Before you start, print these instructions.
Increasing memory capacity is an effective way to make programs run faster. To replace or add a memory
module, read the following prerequisites, and then the instructions.
When replacing a memory module, be sure to follow the precautions.
Note: The operating speed of the memory module has dependency on the system configuration. In some
conditions, the memory module in your computer might not be able to operate at the maximum speed.
Attention: Before you start installing a memory module, touch a metal table or a grounded metal object. This
action reduces any static electricity from your body. The static electricity could damage the memory module.
To replace a memory module, do the following:
1. Turn off the computer; then disconnect the ac power adapter and all cables from the computer.
2. Remove the keyboard. For details of removing the keyboard, see "Replacing the keyboard" on page 77.
1 . Ensure that both cables are not pinched by
Chapter 6
75
.
Replacing devices