Front Panel Controls - Laney LX120Twin User Manual

Laney
1

FRONT PANEL CONTROLS

1 This socket should be used for connecting your instrument to the amplifier. Only use a good quality screened cable.
2 Controls the volume level of the clean channel.
3 Controls the amount of bass or bottom end present on the clean channel.
Controls the amount of mid present on the clean channel.
4
Controls the amount of treble present on the clean channel.
5
Switch in to activate the overdrive 'Crunch' channel. When active, control the amount of distortion with
6
volume with
9
Indicates that the drive channel is active.
7
Controls the crunch channel gain, low down for classic rock and blues, higher up for hard rock and metal.... the higher you go
8
the more Extreme it gets. Use in conjunction with
9 Controls the overall level on the drive channel. Use with
eXtreme Tone Shaping. This applies a scooped mid tone shape to the drive channel and boosts certain key frequencies for a
10
unique sound.
11 Controls the amount of bass or bottom end present on the drive channel.
2 3 4 5 6 8
7
9 11 12 13 14
10
to get the overall level balanced how you want it.
9
8
OPERATING INSTRUCTIONS
15 16 17 18 20
19
and the overall
8
Page 6 /12