Korg TRITON Le Easy Start page 4

TRITON Le EasyStart
Sequence Mode: Creating songs quickly with Song Templates
1. Press the SEQ key
numeric keypad, then press ENTER
2. Press F8 ("UTILITY") and CURSOR ► to "Load Template Song"
choose one of Song Templates: "P00-P16". Each song selection will load programs and effects to tracks.
3. CURSOR ▼ to "Copy Pattern to Track too?" and "check" the box with the DIAL or by pressing the INC
key Press F8 to confirm: make sure that the pattern field highlighted is set to "Preset"
the Pattern number and use the DIAL to select a Pattern in the same style as your Song Template choice
Press F6 4 to 8 times, to copy the pattern into the track for a number of measures, and then press F7 to exit
Press the START/STOP key to audition the copied drum pattern
stop.
!
When you press F6 to copy the pattern, you can first select a new pattern to create a series of patterns in the
track.
4. Press the LOCATE key to return to the beginning of the Song
sequence page, and press the INC key to select Track 2 (except for the Orchestral Template, Track 2 is
always Bass)
When finished, press START/STOP to stop recording.
5. Press the MENU key, and then press F1 to highlight "Loop"
the TIMBRE/TRACK key and press F2 (or CURSOR ►) to select Track 2
Track 2's "loop box"
set the "loop end value" to the last measure you played on Track 2
beginning, and then press the START/STOP key to playback the song and looped bass track
START/STOP key again to stop.
6. Repeat previous steps 4 and 5 as you record additional tracks and set desired Play Loops.
...Continue by Automating the Mix:
7. CURSOR to the "Track edit cell" and select a track from the previous steps for mixing.
8. Press F6 ("Pref"), and then press the INC key to select "Over Dub" for "REC setup."
9. Press F4 to view the Mix for tracks 1-8
keys to highlight one of the tracks
track.
10. Press the REC/WRITE key, then the START/STOP key, and record volume changes on the track by using
the DIAL Press START/STOP when finished.
11. Press START/STOP to audition the results - the volume parameter and value will update as the song plays
back. Note that track pan messages may be recorded in similar fashion.
Using the Compare function as 'UNDO' in Sequence mode
If you are dissatisfied with a 'take' or a recorded mix, press the COMPARE key once so it is lit: it serves as "one level
of Undo". Simply Record again while the COMPARE key is lit, and you'll record new data in the current track. "Toggle"
the COMPARE key to listen to both "takes". Note that moving to, and recording/editing another track (or leaving
sequence mode) will clear the Compare buffer. Before you begin work on a new track, make sure that the currently
selected state of Compare contains the data that you want to keep!
Type in a "Song #" not yet in use (if you've loaded the Preload Songs, type #2) on the
Confirm "Create New Song?" by pressing F8 ("OK").
Press the REC/WRITE key, and then the START/STOP key, and record 2 to 4 measures
CURSOR ▼and leave the "loop start value" at "measure 001"
While holding down the TIMBRE/TRACK key, press the F1 - F8
CURSOR ▼ once to highlight the volume parameter for the selected
Press F8 to confirm
Press the START/STOP key again to
CURSOR ▼ to the Track edit cell on the main
Press F8 to open the Loop Page
Press LOCATE to move to the song
4
Use the DIAL to
CURSOR ▼ to
Hold down
Press the INC key to "check"
CURSOR ▼ and
Press the