3.2.1
Batteries:
First insert two Type AA 1.5 V batteries into the battery compartment
•
of the Thermo-Hygro-Sensor.
Immediately following this insert three Type AA 1.5V batteries into
•
the battery compartment of the Touch Screen Weather Station.
Please help in the preservation of the environment and
return used batteries to an authorized depot.
3.2.2
AC/DC Mains Adapter:
Firstly also insert two Type AA 1.5 V batteries into the battery
•
compartment of the Thermo-Hygro-Sensor.
Immediately following this connect the AC/DC mains adapter to the
•
Base Station and then plug it into a regular mains outlet.
Note: In both cases it is important to observe this order of succession
since the Sensor will send an identification code which has to be
received and stored by the Base Station within the first few minutes of
operation.
After doing this full operation of the entire Weather Station System is
ensured.
34