Sonim XP3340 Z1 SENTINEL User Manual page 52

voicemail Server
Your incoming calls can be forwarded to your voice mail.
Callers will be prompted to leave a message for you. This
feature requires you to enter a voice mail number which
is provided by your service provider. To set voice mail
number, select Menu > Messages > Message settings
> Voicemail server. Enter the number provided by your
service provider. Select Save. This number should be
used when you want to listen to your stored voice mail
messages.
When you need to listen to your incoming voice mail
messages, select Menu > Messages > Text message
> Voicemail server. Select voice mail number. Select
Options > Call voicemail. You are connected to your
mailbox where you can hear the stored voice mails
messages.
You can also select Options > Edit to edit the voice mail
name and number.
For quick access to voice mail, press and hold
1.
Text Input Mode
When you enter text, the input mode is displayed at the
top left of the screen. Press and release the # key to view
the different text input modes, that is conventional (Abc/
ABC/abc) and numeric (123). Press and hold the # key to
enable the T9 mode.
In conventional mode, you can enter a letter by
repeatedly pressing a key until the letter you want
appears. Numeric mode is used to input numbers.
In T9 mode, when you press a key, the alphabets or
letters are displayed. Scroll to the alphabet or letter and
press the menu key to select.
5. To switch between upper case (ABC), lower
case (abc) or sentence case (Abc), use key #.
When the sentence case is used, the letter which
comes immediately after the characters full stop
(.), exclamation mark (!) and question mark (?)
automatically becomes capital.
6. To enter a character, press the numeric key
repeatedly until the desired character appears on
the screen. For example, to enter GOOD, in the text
mode, press 4 once to display G, press 6 thrice to
display O, and again press 6 thrice to display O and
press 3 once to display D.
OR
If you are in T9 mode, press 4 once. Press 6 twice.
Press 3 once, scroll to and select GOOD.
7. When editing text, to insert a space between
characters or words, press 1.
To erase a character select Clear.
8.
9. Press 0 to insert a full stop(.).
To insert special characters, press * to display the special
characters. Press the navigation keys to scroll through
the special characters. Select the character to appear in
the text.
Press and hold * to display the text input in different
languages. Press the menu key to select the language.
Select Done to change the text input language.
52