Processor And Heatsink Installation - Supero H8QGL-6F User Manual

H8QGL-6/iF SERVERBOARD USER'S MANUAL
2-2

Processor and Heatsink Installation

Caution: Exercise extreme caution when handling and installing the processor. Always
connect the power cord last and always remove it before adding, removing or changing
any hardware components.
Installation Procedure
Follow the procedures as listed below to install the motherboard into a chassis.
1. Install the processor(s) and the heatsink(s).
2. Install the motherboard in the chassis.
3. Install the memory and add-on cards.
4. Finally, connect the cables and install the drivers.
Installing the Processors
1. Begin by removing the cover plate
that protects the CPU. Lift the
lever on the CPU socket until it
points straight up.
2. With the lever raised, lift open the
silver CPU retention plate.
2-2