Advertisement
OPERATING MANUAL AND USER GUIDE
SETTING UP/ SPEAKER PLACEMENT
The uniform dispersion of the V Series Series makes it easy to position the speakers where you
need them, rather than trying to rearrange the room to accommodate the sound system. And the
trapezoidal shaped cabinet with heavy duty handles makes transporting the speakers that much
easier. An integral stand socket allows you to place the speakers high above the audience for best
sound coverage.
When you don't think you are getting all the bass you need, the V Series has a couple of great
subwoofers: the V15B and V18B. These are powerful bass reflex subwoofers that give you the
lowest frequencies and the punch you need. They are straight forward, no nonsense, bass reflex
subwoofers with exceptional low frequency response.
CONNECTIONS / WIRING
Connecting the V Series to your system is easy. The input panel includes parallel TS 6.35mm (1/4")
connectors. Run your speaker wires from your amplifier, to the speaker; you can use either input
connector. Be sure to use high quality, low gauge (thick) speaker wire and NOT shielded cable —
for
all speaker connections.
The V15B and V18B Subwoofers have Hi-pass output jacks so you can use just one channel of
an amplifier for your full range system including a subwoofer. Run your speaker wires to the input
of the sub and another speaker wire from the subwoofer hi-pass output jack to the input of the full
range speaker on a stand or sitting atop the sub. Placement depends on your sound coverage
requirements.
5
1/4" Jack Plug
Ring= - on amp
terminal
Tip= + on amp
terminal
Hide quick links:
Advertisement
