Audio Adjustments (Kdc-5057Sd); Audio Control - Kenwood KDC-BT73DAB Instruction Manual

4. Audio adjustments (KDC-5057SD)

4-1. Audio control

You can adjust the audio control items.
1
Press [SRC] to select a source other than
Standby ("STANDBY").
Refer to <Source selection> (page
2
Press [Control] knob.
Enters the Function setting mode.
3
Select "Audio Control" using [Control] knob.
For how to use [Control] knob, refer to
to select the item> (page
4
Select a audio control item using [Control]
knob.
Display Audio control item Range
"SubWoofer Level" Subwoofer level
"Bass Level" Bass level
"Middle Level" Middle level
"Treble Level" Treble level
"Equalizer PRO"
"Bass Adjust"
"Bass Center Bass Center Frequency 60/ 80/ 100/ 200 (Hz)
FRQ"
"Bass Level" Bass level
"Bass Q Factor" Bass Q Factor
"Bass EXT" Bass Extend
"Middle Adjust"
"Middle Center Middle Center
FRQ" Frequency
"Middle Level" Middle level
"Middle Q Factor" Middle Q Factor
"Treble Adjust"
"Treble Center Treble Center
FRQ" Frequency
"Treble Level" Treble level
"Preset Equalizer" Preset Equalizer curve "Rock"/ "Pops"/
"Bass Boost" Bass Boost
"Loudness" Loudness
"Balance" Balance
"Fader" Fader
"SubWoofer" Subwoofer output
16
|
KDC-BT73DAB/ KDC-BT53U/ KDC-5057SD
14).
<3-3. How
13).
–15 — +15 (dB)
–8 — +8 (dB)
–8 — +8 (dB)
–8 — +8 (dB)
–8 — +8 (dB)
1.00/ 1.25/ 1.50/ 2.00
OFF/ ON
0.5/ 1.0/ 1.5/ 2.5 (kHz)
–8 — +8 (dB)
0.75/ 1.00/ 1.25
10.0/ 12.5/ 15.0/
17.5 kHz
–8 — +8 (dB)
"Easy"/ "Top40"/
"Jazz"/ "Powerful"/
"Natural"/ "User"[2]
"Level1"/ "Level2"/
"Level3"/ "OFF"
"Level1"/ "Level2"/
"OFF"
Left 15 — Right 15
Rear 15 — Front 15
OFF/ ON
"Detailed Settings"
"HPF" High Pass Filter
"LPF SubWoofer" Low Pass Filter
"SubWoofer Subwoofer Phase
Phase"
"Supreme"[3] Supreme setting
"Audio Preset" Audio Preset
memory[1]
"Volume Offset" Volume offset
[1]
Refer to <4-2. Audio preset> (page
preset recall> (page 17).
[2]
"User": The customized Bass, Middle, and Treble settings
are effective.
[3]
Audio file source only
5
Select a value using [Control] knob.
Returns to the previous item.
Exiting from the Function setting mode
Press and hold [1/6].
Adjusting Bass, Middle, and Treble levels
• You can set Bass, Middle, and Treble levels for each source.
Through/ 100/ 120/
150 (Hz)
85/ 120/ 160/ Through
(Hz)
Reverse (180°)/
Normal (0°)
ON/ OFF
Recall/ Memory
–8 — ±0 (dB)
(AUX: -8 — +8)
17), <4-3. Audio