Table of Contents
Advertisement
Hussmann® Impact™ Hot Food Merchandiser
Installing Splashguard And Lower Front Panel
Make certain that the end assemblies; end splashguards and end panels have been installed
according to the End Kit instruction.
The splashguard and lower front panel are shipped inside each case. After merchandisers have been
leveled, joined and electrical work has been completed, install the splashguard and lower front panel.
Splashguards
1. At front of merchandiser, attach a splashguard retainer/bracket to each leg with sheet metal
screws.
2. Position top of splashguard over the top edge of the retainer/bracket as shown below.
3. Push the lower edge of the splashguard toward the bottom of the bracket until it snaps into place.
Lower Front Panel
1. Position the lower front panel with the top angled as shown in the illustration. Tabs extending
from the upper front assembly are designed to fit into the slots on the top of the lower front panel.
23
Installation
Advertisement
Table of Contents
