Fujitsu LIFEBOOK S752 User Manual page 112

To make a copy of the Factory Image to DVD discs, you will need four or five blank discs (DVD-R or DVD+R discs are
recommended) to create the copy. After creating the copy, be sure to label the discs and keep them in a safe place to
ensure they do not get damaged.
Creating Backup Images of Factory Image and Bootable Disc
Using the [Manage/Change] button, you can create backup images of the Factory Image and/or Bootable Disc.
A -
LL USER CREATED DATA WILL BE DELETED FROM YOUR SYSTEM WHEN THE FACTORY IMAGE IS RESTORED
Launch System Backup and Restore from the desktop icon and click [Yes] on the User Account Control dialog.
1
Click [Next] on the Backup Your Data screen.
2
Select the [Manage/Create] tab, then click [Make Recovery Disc set] to burn your factory image to DVD.
3
On "Step 1: Please select a media type for Recovery Disc" screen select Media Type from the drop down box, then
4
click [Next]. (Note: This screen shows the number of discs required for backup.)
On "Step 2: Confirm your Recovery Disc" both the Bootable Disc and Recovery disks are selected by default under
5
"List of Recovery Discs". When the backup is created for the first time, these options should stay selected. Click
[Next].
Click [OK] on the "Attention about media" confirmation screen.
6
D
URING THE FOLLOWING PROCESS
Click [Start] on "Step 3: Making Recovery Disc" .
7
The process will prompt you to insert your discs.
8
, AC A
YOU SHOULD CONNECT AN
106 - Restoring Your System Image and Software (Windows 8)
DAPTER SINCE THE PROCESS MAY TAKE A LONG TIME
.
.