Quick Reference Guide; Sending Faxes; Receiving Faxes - Brother FAX-8360P Owner's Manual

Quick Reference Guide

For Thai, Arabic, Indonesian, Cantonese, please refer to Quick Reference Guide enclosed
in the carton box.

Sending Faxes

Automatic Transmission
1
Place the original face down in the
Automatic Document Feeder.
2
Enter the fax number using One Touch,
Speed Dial, Search or the dial pad.
3
Press Fax Start.
Sending a Cover Page
1
Place the original face down in the
Automatic Document Feeder.
2
Press Menu, 2, 2, 7.
3
When NEXT FAX ONLY appears, press
Set.
4
Press or to select ON (or OFF), and
then press Set.
5
Press or to select a comment and
then press Set.
6
Enter two digits to indicate the number of
pages being sent, and then press Set.
7
Press 1 to select additional settings
—OR—Press 2 if you are ready to fax.
8
Enter the fax number.
9
Press Fax Start.
Real Time Transmission
You can send faxes in real time.
1
Place the original face down in the
Automatic Document Feeder.
2
Press Menu, 2, 2, 5.
3
Press or to select ON, and then press
Set
—OR—
For the next transmission only press
to select NEXT FAX ONLY, and then
press Set.
4
For the next fax only, press
select ON, and then press Set.
5
Press 1 to select additional settings
—OR—Press 2 if you are ready to fax.
6
Enter the fax number.
7
Press Fax Start.

Receiving Faxes

Select Receive Mode
There are four different receive modes:
FAX/TEL, TAD, MANUAL and FAX. Press
Mode repeatedly until the FAX and FAX/TEL
(F/T) light shows your selection.
To select FAX/TEL or MANUAL as your
receive mode, you will need to connect an
external telephone. (Make sure you set Ring
Delay and F/T Ring Time when the FAX/TEL
is selected.)
or
or to
iii