Air atomizer kit for use with mark iv, mark v and gmax 5900hdtexture sprayers (4 pages)
Summary of Contents for Graco 243066
Page 1
READ AND KEEP FOR REFERENCE. INSTRUCTIONS Pressure Roller Model 243066, Series A D 20 in. (50 cm) heavy-duty extension D 45_ swivel adapter D 9 in. (23 cm) roller frame D 1/2 in. (13 mm) nap roller cover 3600 psi (24.8 MPa, 248 bar) Maximum Fluid Inlet Pressure...
Page 2
Warnings and Cautions WARNING EQUIPMENT MISUSE HAZARD Misuse can cause the equipment to rupture or malfunction and result in serious injury. To help prevent injury D Do not modify the extension tube or roller frame or use parts not designed for this equipment.
9 in. (23 cm); 3/4 in. (19 mm) nap 107592 9 in. (23 cm); 1-1/4 in. (32 mm) nap Parts Drawing Pressure Roller, Model 243066, Series A retaining nut HINT: When replacing gasket (2*) and o-ring (3*) in swivel adapter (7), position o-ring first, then press gasket into place.
Page 4
Graco Warranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.