Belkin N150 User Manual page 26

GETTING TO KNOW YOUR ROUTER
E) Wi-Fi Protected Setup (WPS) Light
The small light near the WPS button shows what is happening
while you are using WPS to establish a connection.
Off: Idle
Blinking Blue: The Router is listening for a WPS-
enabled computer or other device.
Solid Blue: The Router has made a secure
connection with the computer or other device.
Amber: A connection was not created.
F) Wi-Fi Protected Setup (WPS) Button
The WPS button on the front of your Router can be
used to help establish a secure connection between
your Router and other WPS-enabled Wi-Fi devices
such as computers. To use WPS, refer to page 9.
G) Router Status Light
Your Router's status is shown by the light on the front.
Off: The Router is not plugged into a power source.
Blinking Blue: The Router is starting up.
Solid Blue: The Router is connected to the Internet.
Blinking Amber: The Router can't detect the modem. Either the
modem is off, is not plugged into the Router, or is unresponsive.
24