Snmp; Enabling Snmp; Configuring Snmpv1/V2C - Xerox Phaser6700 System Administrator Manual

SNMP

Simple Network Management Protocol (SNMP) is a set of network protocols designed to allow you to
manage and monitor devices on your network.
You can use the SNMP configuration pages in CentreWare Internet Services to:

Enable or disable Authentication Failure Generic Traps.

Enable SNMPv3 to create an encrypted channel for secure printer management.

Assign privacy, authentication protocols, and keys to Administrative and key user accounts.

Assign read and write access to User accounts.

Limit SNMP access to the printer using hosts.

Enabling SNMP

1. In CentreWare Internet Services, click Properties > Connectivity > Protocols.
2. Click SNMP.
3. Select Enable SNMP v1/v2c Protocols to enable the protocol.
Select Enable SMNP v3 Protocols to enable the protocol.
4.
5. Under Authentication Failure Generic Traps, select Enable to prompt the printer to generate a trap
for every SNMP request processed with an invalid community name.
6. Click Apply to save the new settings or Undo to retain the previous settings.
Click Apply after enabling the protocols and before navigating to any other pages to ensure
Note:
that your settings are saved.

Configuring SNMPv1/v2c

SNMP version 1 (SNMPv1) is the initial implementation of the SNMP protocol. SNMPv1 operates over
protocols such as User Datagram Protocol (UDP), IP, and Novell Internet Packet Exchange (IPX).
SNMPv2c includes improvements in performance, confidentiality, and manager-to-manager
communications over SNMPv1, however it uses the simple-community based security scheme of SNMPv1.
Network Configuration
Phaser 6700 Color Printer
System Administrator Guide
27