Installing Windows; Installing Windows Nt - AOpen AK33 Easy Installation Manual

Motherboard

Hide thumbs Also See for AK33:

Table of Contents

Enlarged version

Power-on and Load BIOS Setup

After you finish the setting of jumpers and connect correct cables. Power

Del

on and enter the BIOS Setup, press <Del> during POST (Power-On

Self Test). Choose "Load Setup Defaults" for recommended optimal

performance.

Installing Windows 98

First, don't install any add-on card except AGP card.

Enable USB Controller in BIOS Setup > Advanced Chipset Features > OnChip

USB, to make BIOS fully capable of controlling IRQ assignment.

Install Window 98 into your system.

Install the VIA 4 in 1 driver, which includes VIA AGP Vxd driver, IRQ routing

driver, and VIA chipset function registry program.

Finally, Install other add-on cards and their drivers.

Warning: Please avoid of using

"Load Turbo Defaults", unless you

are sure your system components

(CPU, DRAM, HDD, etc.) are good

enough for turbo setting.

Autorun Menu from Bonus CD Disc

You can use the autorun menu of Bonus CD disc. Choose the utility and driver and

select model name.

Installing Windows 95

First, don't install any add-on card except AGP card.

Install Windows 95 OSR2 v2.1, 1212 or 1214 version and later with USB

support. Otherwise, you need to install USBSUPP.EXE.

Install the VIA 4 in 1 driver, which includes VIA AGP Vxd driver, IRQ routing

driver, and VIA chipset function registry program.

Finally, Install other add-on cards and their drivers.

It is not necessary to install VIA 4 in 1 driver, just follow the installation guide of NT

and your add-on cards.

Table of Contents