Table of Contents
Advertisement
14. Support 10/100 Mbps LAN Onboard (AX4GE-N Only)
On the strength of Intel ICH4 on board, it provides 10/100M bps Ethernet for office and
home use, the Ethernet RJ45 connector is located on top of USB connectors. The orange
LED indicates the link mode, it lights when linking to network and blinking when
transferring data. The green LED indicates the transfer mode, and it lights when data is
transferring in 100Mbps mode. To enable or disable this function, you may simply adjust it
through BIOS.
15. AOpen Bonus Pack CD
You can use the autorun menu of Bonus CD. Choose the utility and driver and select
model name. After selecting the model name, you can install its AGP, IAA, Audio, LAN
and USB2.0 drivers from this CD.
After you finish jumper settings and connect correct cables, power on and
Del
enter the BIOS Setup. Press <Del> during POST (Power On Self Test).
Choose "Load Setup Defaults" for recommended optimal performance.
Green/Transfer
Orange/Link
You may accomplish BIOS upgrade procedure with EzWinFlash by the following steps,
and it's STRONGLY RECOMMENDED to close all the applications before you start the
upgrading.
Download the new version of BIOS package
1.
the
download
(http://www.winzip.com) in Windows environment.
Save the unzipped files into a folder, for example, WAX4GEN102.EXE &
2.
WAX4GEN102.BIN.
3.
Double click on WAX4GEN102.EXE, EzWinFlash will detect the model name and
BIOS version of your motherboard. If you had got the wrong BIOS, you will not be
allowed to proceed with the flash steps.
You may select preferred language in the main menu, then click [Start Flash] to start
4.
the BIOS upgrade procedure.
EzWinFlash will complete all the process automatically, and a dialogue box will pop
5.
up to ask you to restart Windows. You may click [YES] to reboot Windows.
Press <Del> at POST to
6.
"Save & Exit Setup". Done!
It is strongly recommended NOT to turn off the power or run any application
during FLASH PROCESS.
16. Power-on and Load BIOS Setup
Warning: Please avoid of using "Load
Turbo Defaults", unless you are sure
your system components (CPU, DRAM,
HDD, etc.) are good enough for turbo
setting.
17. BIOS Upgrade
zip
file from our official web site. Unzip
BIOS
package
(ex:
WAX4GEN102.ZIP)
enter BIOS
setup, choose "Load Setup Defaults", then
with
WinZip
Advertisement
Table of Contents
