Setting The Volume Distribution; Sound Button; Setting Bass And Treble - Opel Corsa Infotainment System User Manual

Opel corsa infotainment system
Hide thumbs Also See for Corsa Infotainment System:
Table of Contents

Advertisement

100
Introduction
Tone settings
Press the SOUND button to make the
following settings:
■ Fader
■ Balance
■ Bass
■ Treble
■ Sound

Setting the volume distribution

between front - rear
1. Press the SOUND button.
Fader appears on the display.
2. Adjust the value with m or n.
After a few seconds the most
recent display reappears.
3. Once you have changed settings,
press one of the function buttons
FM/AM, CD/MP3 or BC to display
the relevant function.
4. Press the SOUND button until the
last active display appears again.
Setting the volume distribution
between right - left
1. Press the SOUND button until
Balance appears on the display.
2. Adjust the value with m or n.
After a few seconds the most
recent display reappears.
3. Once you have changed settings,
press one of the function buttons
FM/AM, CD/MP3 or BC to display
the relevant function.
4. Press the SOUND button until the
last active display appears again.

Setting Bass and Treble

Make sure that any sound
opitmisations (see below "Sound")
are disabled.
The Bass and Treble settings apply to
the current audio source and are
stored separately for FM, AM and CD.
1. Press the SOUND button until
Bass or Treble appear on the
display.
2. Adjust the value with m or n.
After a few seconds the most
recent display reappears.
3. Once you have changed settings,
press one of the function buttons
FM/AM, CD/MP3 or BC to display
the relevant function.
4. Press the SOUND button until the
last active display appears again.
Sound
1. Press the SOUND button until
Sound and the set tone colour
appear on the display.
2. Select a tone colour with m or
n.
The available tone colour settings
are: Rock, Disco, Classic, Jazz,
Vocal and Off.
After a few seconds the most
recent display reappears.
3. Once you have changed settings,
press one of the function buttons
FM/AM, CD/MP3 or BC to display
the relevant function.
4. Press the SOUND button until the
last active display appears again.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents