AOpen WARM TOUCH WT22M-RH Technology Manual
  1. Manuals
  2. Brands
  3. AOpen Manuals
  4. Desktop
  5. WARM TOUCH WT22M-RH
  6. Technology manual

AOpen WARM TOUCH WT22M-RH Technology Manual

Touch screen computer
Hide thumbs Also See for WARM TOUCH WT22M-RH:
Table of Contents

Advertisement

Quick Links

WARM TOUCH
WT22M-RH
Technology Manual
1

Advertisement

Table of Contents
loading

Related Manuals for AOpen WARM TOUCH WT22M-RH

Summary of Contents for AOpen WARM TOUCH WT22M-RH

  • Page 1 WARM TOUCH WT22M-RH Technology Manual...
  • Page 2 To minimize pollution and ensure utmost protection of the global environment, please recycle the product. For more information about the collection and recycling of Waste Electrical and Electronic Equipment (WEEE), you are invited to visit our homepage at www.aopen.com under “Green Products”...
  • Page 3 Pour plus d’informations sur la gestion des déchets d’Equipements Electriques et Electroniques (DEEE ou WEEE), vous êtes invité à visiter notre site à www.aopen.com sous “ Green Products”. Entsorgungsanleitung (German) Zum besseren Schutze unseres Planeten, schmeissen Sie elektrische Geräte bitte nicht in...
  • Page 4 Para más información acerca de dónde depositar y cómo reciclar Equipos Electrónicos y Desperdicios Electrónicos (WEEE), por favor, visite la página web www.aopen.com y entre en la sección Productos Ecológicos (“Green Products”). Kassering (Swedish) För att bättre värna om vår jord bör denna elektroniska utrustning ej kasseras tillsammans med...
  • Page 5 Copyright Copyright of this publication belongs to AOpen Inc. AOpen reserves the right to change the content of this publication without obligation to notify any party of such changes or revisions. No part of this publication may be reproduced, transcribed, transmitted, translated into any language, stored in a retrieval system in any form or by any means electronically, mechanically, optically without the prior written permission of this company.

  • Page 6: Safety Instructions

    Safety Instructions 1. Please read these safety instructions carefully. 2. Please keep this User’s Manual for later reference. 3. Please disconnect this equipment from connecter before cleaning. Don’t use liquid or prayed detergent for cleaning. Use moisture sheet or cloth for cleaning.

  • Page 7: Fcc Notice

    FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

  • Page 8: Table Of Contents

    Table of Contents 1. Packing List ......1 1-1. Standard Accessories ..........1-2. Optional Accessories ..........2. System View ......2 2-1. Front View ............... 2-2. Rear View ..............2-3. I/O Ports View ............2-4. Dimensions .............. 3. System Assembly ....6 3-1.
  • Page 9 We regret not informing about any changes in usage standards and other related information. AOpen Company reserves the right of altering or modifying the content of this manual. In case of any mistakes or incorrect descriptions, which include those on the products, AOpen makes no guarantee or commitments.

  • Page 10: Packing List

    1. Packing List 1-1. Standard Accessories a. System b. Utility and Driver bank c. Power adapter (90W) d. Power cord e. RJ50-to DB9 cable (x1) (P/N: 50.WT201.0110) Note: The pictures may look slightly different from the product you purchased, due to our constant...

  • Page 11: Optional Accessories

    product improvement effort. 1-2. Optional Accessories RJ-50 to DB9 cable P/N: 50.WT201.0110 Desktop Stand P/N:90.WT134.0010 Floor Stand P/N:90.WT134.0010 Desktop LCD Display / Stand Configuration Available for option * This model is fitted with wheels and allows easy movement. * LCD monitor can be adjustable the height from 1100mm jto 1700mm high. * Main holder dimension: 1700(H) x 600(W) x 600(D) mm.

  • Page 12: System View

    Note: Please set up monitor as landscape, for safety reason no allow turn it to portrait. 2. System View 2-1. Front View 1 Touch screen...

  • Page 13: Rear View

    2 IR Receiver and LED indicate 2-2. Rear View 3 Speaker holes 4 Hard drive disk door 5 VESA mounting screw holes 6 Ventilation holes...

  • Page 14: I/O Ports View

    2-3. I/O Ports View 1. RJ-50 RS232 x 4 2. RJ-11 Cash Drawer Connector 3. RJ-50 Monitor RS232 support Daisy Chain 4. Printer Port 5. PC VGA out 6. Dual Giga LAN 7. USB x 6 8. Monitor VGA in...

  • Page 15: Dimensions

    2-4. Dimensions Panel Size System Size WT22M-RH 495.6 (W) x 292.2 (H) x 16.35(D) (typ) 532x332x60mm(WxHxD) WT19M-RH 428.0(W) x 278.0(H) x 16.5(D) (Typ) 474x322x65mm(WxHxD)

  • Page 16: System Assembly

    3. System Assembly 3-1. HDD Replacement 1. Turn to the rear side of the system. 2. Unscrew the screw (x1) securing the HDD door and the rear cover of the system.

  • Page 17: Ram Replacement

    3. Disconnect the SATA cable from the drive. 3-2. RAM Replacement Opening the Rear Cover Please open the rear cover first then remove and replace the RAM module. You can refer to the motherboard layout to find the memory compartment. 1.

  • Page 18: Power Adapter Replacement

    Removing a RAM Module 2. Use both fingers to pull the ejector clips out of the sides of the module. 3. Slide the memory module out of the memory slot. Installing a RAM Module 4. Slide the memory module into the memory slot and press down until the ejector clips click in place.

  • Page 19: Peripheral Installation

    4. Peripheral Installation 4-1. External Module Installation 1. Turn the system to the rear side. 2. Attach the external module into the right position of the system and fasten the screws (x2). 3. Connect the external module cable to the USB and COM-RJ45 convertible connector on the I/O panel.

  • Page 20: Wall Mount Kit Assembly

    4-2. Wall Mount Kit Assembly 1. Fix the wall-mount bracket onto the wall. 2. Place the VESA bracket onto the VESA mounting holes on the system and fasten the screws (x4). 3. Align the VESA bracket with the system into the wall-mount brakcet and make sure they are well...

  • Page 21: Kiosk Bracket Assembly

    4-3. KIOSK Bracket Assembly 厚度：60.5mm...

  • Page 22: Wireless Lan Installation

    4-4. Wireless LAN Installation To external antenna 4-5. CF Card Module Installation 1. Turn over the system to access the HDD door. 2. Unfasten the screw (x1) to remove the HDD door.
  • Page 23 3. Assemble the CF to SATA bridge board onto the HDD bay with the screws (x3). 4. Replace the CF card by sliding it into or outward from the slot of CF bridge board. 5. Reverse the step 1 to cover the HDD door.

  • Page 24: Cash Drawer (Rj-11) Software Configuration

    4-6. Cash Drawer (RJ-11) Software Configuration You can install a cash drawer through the cash drawer port. Please verify the pin assignment before installation. Cash Drawer Pin Assignment Signal DOUT bit0 DIN bit0 12V / 24V DOUT bit1 Cash Drawer Controller Register The Cash Drawer Controller use one I/O addresses to control the Cash Drawer.
  • Page 25 Reserved Cash Drawer "DOUT bit1" pin output control Cash Drawer "DOUT bit0" pin output control Reserved Cash Drawer "DIN bit0" pin input status Reserved COM Connector Pin 36 = SuperIO(F81865F) Pin 53 as GPIO01 COM Connector Pin 38 = SuperIO(F81865F) Pin 54 as GPIO02 COM Connector Pin 40 = SuperIO(F81865F) Pin 56 as GPIO04...
  • Page 26 How to program the related registers: 0x4e, 0x87 ; Enable register read/write by softeare. 0x4e, 0x87 0x4e, 0x07 0x4f, 0x06 ; Set LDN 0x4e, 0x30 ; Set register's Index( 0x30, for example ) byte_value, 0x4f ; Get the register value from chip. byte_value, 0xfe ;...
  • Page 27 CR06 Index F1h[4] = 0/1 = GPIO04(COM Connector Pin 40) with a Lo/Hi voltage output while it is output mode. CR06 Index F2h[1] = 0/1 = GPIO01(COM Connector Pin 36) read as a Lo/Hi voltage input while it is input mode. CR06 Index F2h[2] = 0/1 = GPIO02(COM Connector Pin 38) read as a Lo/Hi voltage input while it is input mode.

  • Page 28: Gravity Vector Seneor's Gpio Pins Software Configuration

    4-7. Gravity Vector Seneor's GPIO Pins Software Configuration 1. Set PCH_GPIO6, PCH_GPIO7 as GPIO pins mode byte_value, 0x0501 byte_value, 0x3f byte_value, 0xc0 0x0501, byte_value 2. Set PCH_GPIO6, PCH_GPIO7 as Input pins mode byte_value, 0x0504 byte_value, 0x3f byte_value, 0xc0 0x0504, byte_value 3.
  • Page 29 系統組裝有關, 軟體請依系統實際組裝狀態撰寫. if ( byte_value = 0x40 ) { gravity vector = ? and what to do. } if ( byte_value = 0x80 ) { gravity vector = ? and what to do. } if ( byte_value = 0xc0 ) { gravity vector = ? and what to do. } In DOS, you just use ASM with "in"...

  • Page 30: Specification

    5. Specification Intel Sandy Bridge CPU (socket 988) CHIPSET Intel QM67 (Huron River Platform) MEMORY Support : SO-DIMM DDR3 x 2 (MAX 8G) GRAPHICS Intel CPU Build-in Dual Intel Lan W82579LM+intel 82583V Audio Realtek ALC886 (Option) Mini-Card slot (Wi-Fi, Digital TV Tuner card, 3G Module for optional) Storage 320G 2.5”...
  • Page 31 WT22M-RH Panel 21.5” (1920x1080 250cd/m WT19M-RH Panel 19” (1440x900 250cd/m Side I/O – with cover COM Port x4 (RI/5V/12V by Jumper) RJ-50 Type COM2 (232/422/485 by Jumper) RJ-11(Cash drawer 12V/20V by Jumper) Printer Port x1 USB 2.0 x6 GbE LAN RJ45 *2 5.1 CH Audio Jack (horizontal x 3) DC 20V (AC Adaptor 20V/4.5A/90W)

  • Page 32: Jumper Setting

    6. Jumper Setting 6-1. For Huronriver Motherboard 6-1-1.Motherboard Placement...
  • Page 33 6-1-2. I/O board Placement 6-1-3. Jumper Setting RJ50-DB9F serial Cable...

  • Page 34: Pin Definition

    Pin Definition RJ45 Pin RS_232 RS_485 RS_422 DB9 Pin DCD# RS485_TXRX- RS422_TX- RS485_TXRX+ RS422_TX+ RS422_RX+ DTR# RS422_RX- DSR# RTS# CTS# - - - - - - Signal Signal Data Carrier Detect Data Set Ready Received Data Request to Send Transmitted Data Clear to Send Data Terminal Ready Ring Indicator...
  • Page 35 COM2 RS232/485/422 Setting Default Setting COM2 setting RS232 RS422 RS485 COM1, COM2, COM3 & COM4 RI or Power Setting Default Setting RI Power Jumper Port COM1 COM2 COM3 COM4...

  • Page 36: Appendix A: Drivers Installation

    Cash Drawer Power Setting RJ11 Power CMOS Operation Mode Appendix A: Drivers Installation The shipping package includes a Driver CD in which you can find every individual driver and utility that enables you to install the drivers on the system. Please insert the Driver CD into the drive and double click on the “index.htm”...

Table of Contents