Wetting Hose - Graco GTX 257030 Operation Manual

Wetting Hose

Wet inside of hose before each use to flush out sedi-
ment and prevent texture material from packing out
hose.
1. Pour one (1) gallon (3.8 liters) of clean water into
hopper.
2. Close gun air valve (23).
3. Turn air inlet valve (E) open. Aim gun into hopper
(G) and trigger gun to circulate water for a few min-
utes to wet inside of material hose.
313384B
23
closed
ti4005
4. Trigger gun into waste pail until hopper no longer
contains water.
ti4290a
WASTE
5. Open gun air valve (23) to relieve compressor air.
Wetting Hose
23
9