Outgoing Call - Brother MFC-J825DW Basic User's Manual

Chapter 4
c
You can change the following fax
sending settings. Press FAX and then
press d or c to scroll through the fax
settings. When the setting you want is
displayed, press it and choose your
option.
(Basic User's Guide)
For details about changing the following
fax sending settings, see pages 31 to
32.
 Glass ScanSize
Colour Fax Transmission

 Preview Outgoing Fax
 Transmission Verification Report
(Setup)
(Advanced User's Guide)
For more advanced fax sending
operations and settings
uuAdvanced User's Guide: Sending a
fax (MFC-J825DW only)
 Contrast
 Fax Resolution
 Set New Defaults
 Factory Reset
 Faxing at End of Call
 Broadcasting
 Real Time Transmission
 Overseas Mode
Delayed Fax

 Batch Transmission
 Cancelling Waiting Jobs
 Polled Transmit
30
d
Enter the fax number.
Using the dial pad
Using Speed Dial

Speed Dial
Using call history


Outgoing Call


Caller ID hist.
Note
You can preview a fax message before
sending it by setting Preview to On. (See
How to preview an outgoing fax
uu page 31.)
e
Press Mono Start or Colour Start.
Faxing from the ADF
 The machine starts scanning the
document to be sent.
Faxing from the scanner glass
 If you pressed Mono Start, the
machine starts scanning the first
page. Go to step f.
 If you pressed Colour Start, the
LCD asks if you want to send a
colour fax. Press Yes to confirm. The
machine starts scanning and
sending the document.
f
When the LCD asks you Next Page?,
do one of the following:
 To send a single page, press No (or
press Mono Start again).
The machine starts sending the
document.
 To send more than one page, press
Yes and go to step g.
g
Place the next page on the scanner
glass.
Press Mono Start or Colour Start.
The machine starts scanning the page.
(Repeat steps f and g for each
additional page.)