Advertisement
Anya's electrical power and signal distribution system is nearing completion,
with design sketches for the 230 volt version shown here. Each unit will supply
power for up to 12 modules and fully redundant Dante™ network for 12
modules. The rolling cases will stack or fly near the array to shorten cable runs.
Power
Custom distribution panels from Motion Labs®,
featuring robust, standard connectors for both 230
and 115 volt three-phase input. Circuit breakers feed
a consolidated, multi-pin output that connects to
preconfigured cabling for individual modules.
Network
Custom network panels from LinkUSA®, featuring
standard network connectors for input and throughput,
high-bandwidth switches and multi-pin output that
connects to preconfigured cabling for individual
modules. Opt for redundant connection to 12 modules
or non-redundant connection to 24 modules.
ESTIMATED 23.50 in
FRONT RACK RAIL TO REAR RACK RAIL: 14.00 in
CL TO FRONT RACK RAIL: 9.33 in
NETWORK SWITCH
NETWORK
PANEL
NETWORK SWITCH
DISTRIBUTION
PANEL
DISTRIBUTION
PANEL
Each time you assemble an array, the self-aware and neighbor-sensitive modules collectively determine
their configuration and express themselves to Resolution™ software as a single unit. Based on user
specifications, Resolution sends each module – in fact, each transducer – instructions to adapt total array
performance for any specified coverage area. These application profiles offer a small sampling
of the possibilities.
Large indoor arena,
stage right array
This complex, multi-
level venue requires
two substantial
columns to manage the
disparate requirements.
Each array covers 120
horizontal degrees
but with varying
vertical directivity from
column to column.
Still, each array delivers
sound as a single,
integrated entity.
Coverage Area:
220' x 280'
Broadband SPL
Range (dB):
111.1 – 104.8
Advertisement
