Bios Upgrade - AOpen AX45-533 PLUS Easy Installation Manual

14. Support 10/100 Mbps LAN Onboard
The South Bridge SIS962 includes a fast Ethernet controller on chip. On the strength of
Realtek 8100BL LAN controller on board, which is a highly-integrated Platform LAN
Connect device, it provides 10/100M bps Ethernet for office and home use, the Ethernet
RJ45 connector is located on top of USB connectors. The green LED indicates the link
mode, it lights when linking to network and blinking when transferring data. The orange
LED indicates the transfer mode, and it lights when data is transferring in 100Mbps
mode. To enable or disable this function, you may simply adjust it through BIOS.
15. Bonus Pack CD
You can use the autorun menu of Bonus CD. Choose the utility and driver and select
model name. After selecting the model name, you can install its AGP, IDE, Audio, LAN
and USB2.0 drivers from this CD.
Green/ACT
Orange/Speed
You may accomplish BIOS upgrade procedure with EzWinFlash by the following steps,
and it's STRONGLY RECOMMENDED to close all the applications before you start the
upgrading.
1.
2.
3.
4.
5.
6.
7.
It is strongly recommended NOT to turn off the power or run any application
during FLASH PROCESS.
16. Power-on and Load BIOS Setup
After you finish jumper settings and connect correct cables, power on and
Del
enter the BIOS Setup. Press <Del> during POST (Power On Self Test).
Choose "Load Setup Defaults" for recommended optimal performance.

17. BIOS Upgrade

Download the new version of BIOS package
Unzip the download BIOS package (ex: WAX45533P102.ZIP) with WinZip
(http://www.winzip.com) in Windows environment.
Save the unzipped files into a folder, for example, WAX45533P102.EXE &
WAX45533P102.BIN.
Double click on WAX45533P102.EXE, EzWinFlash will detect the model name and
BIOS version of your motherboard. If you had got the wrong BIOS, you will not be
allowed to proceed with the flash steps.
You may select preferred language in the main menu, then click [Start Flash] to start
the BIOS upgrade procedure.
EzWinFlash will complete all the process automatically, and a dialogue box will pop
up to ask you to restart Windows. You may click [YES] to reboot Windows.
Press <Del> at POST to enter BIOS
"Save & Exit Setup". Done!
Warning: Please avoid of using "Load
Turbo Defaults", unless you are sure
your system components (CPU, DRAM,
HDD, etc.) are good enough for turbo
setting.
zip file from our official web site.
setup, choose "Load Setup Defaults", then