Table of Contents
Advertisement
14. 10/100/1000Mbps LAN Onboard
On the strength of Realtek 8100C LAN controller (for MK77M-8XN and MK77M-1394) or
8110S-32 LAN controller (for MK77M-8XL) on board, which are highly integrated platform
LAN connect devices, they provide 10/100Mbps or gigabits Ethernet for office and home
use. The Ethernet RJ45 connector is located on top of USB connectors. The right-hand side
LED on RJ45 connector indicates linking mode; It shows yellow whenever accessing to
network. The left-hand side LED on RJ45 connector indicates transferring mode; it lights in
green when 100Mbps LAN is connected (no light while 10Mbps is connected), and lights in
orange when gigabits LAN is connected. To enable or disable this function, you can simply
adjust it in BIOS.
15. Power-on and Load BIOS Setup
After you finish the setting of jumpers and connect correct cables. Power on
Del
and enter the BIOS Setup, press <Del> during POST (Power On Self Test).
Choose "Load Setup Defaults" for recommended optimal performance.
Left: Transferring
Green (100Mbps)
Orange (1000Mbps)
Right: Linking (Yellow)
Warning: Please avoid of using "Load
Turbo Defaults", unless you are sure
your
system
components
(CPU,
SDRAM, HDD, etc.) are good enough for
turbo setting.
16. AOpen Bonus Pack CD
You can use the autorun menu of Bonus CD. Choose the utility and driver and select
model name.
17. BIOS Upgrade under Windows Environment
You may accomplish BIOS upgrade procedure with EzWinFlash by the following steps, and
it's STRONGLY RECOMMENDED to close all the applications before you start the
upgrading.
1.
Download the new version of BIOS package zip file from AOpen official web site. (ex:
http://english.aopen.com.tw/)
2.
Unzip the download BIOS package (ex: WMK77M8XN102.ZIP) with WinZip
(http://www.winzip.com) in Windows environment.
3.
Save the unzipped files into a folder, for example, WMK77M8XN102.EXE &
WMK77M8XN102.BIN.
4.
Double click on the WMK77M8XN102.EXE, EzWinFlash will detect the model name
and BIOS version of your motherboard. If you had got the wrong BIOS, you will not be
allowed to proceed with the flash steps.
5.
You may select preferred language in the main menu, then click [Start Flash] to start
the BIOS upgrade procedure.
6.
EzWinFlash will complete all the process automatically, and a dialogue box will pop up
to ask you to restart Windows. You may click [YES] to reboot Windows.
7.
Press <Del> at POST to enter BIOS setup, choose "Load Setup Defaults", then "Save
& Exit Setup". Done!
Warning: The upgrade of new BIOS will permanently replace your original BIOS
content after flashing. The original BIOS setting and Win2000/WinXP PnP
information will be refreshed and you probably need to re-configure your system.
Advertisement
Table of Contents
