Connection - Panasonic WV-NW960 Installation Manual

Connection

Caution:
Before starting connection, make sure that the circuit breaker is switched off. Failure to do so could result in fire,
injury, electric shock or property destruction.
Power cable
Ethernet cable connector
Data transmission
Data reception
Network cable
RJ45 conversion connector (provided)
Output cable for
adjustment-specific monitor
(BNC)
External I/O
cables
Microphone input cable (white)
To a plug-in power type microphone
Audio output cable (black)
To an external powered speaker
*1: The grounding wire should be connected to ground.
Red
TX+
Orange
TX+
RX+
Yellow
RX-
Green
To an outlet (220 V to 240 V AC, 50 Hz) for WV-NW960
24 V AC cable for camera
Ethernet cable
Coaxial cable
8P alarm cable (provided)
External I/O cable connector
q
ALARM IN1/BW IN (black) (EXT I/O 1)
w
GND (brown)
e
ALARM IN2/ALARM OUT (red) (EXT I/O 2)
r
GND (orange)
ALARM IN3/AUX OUT (Yellow) (EXT I/O 3)
t
GND (light blue or green)
y
Unused (blue)
u
GND (purple)
i
To an outlet
(24 V AC, 50 Hz)
for WV-NW964
1
Grounding wire *
To a hub, PC, etc.
To the monitor used
for adjustment
To a sensor
19