Nat Static Ip - Orion 3000 User Manual

Set NAT/PAT Port forwarding table
CM>nat static portmapping add 21 192.168.100.23 ftp
CM>show nat config
NAT : Enable
WAN SETUP :
NAT public IP configuration : Manually
Static NAT public IP address : 68.5.203.15 Subnet Mask : 255.255.254.0
Static NAT public Gateway IP address : 68.5.202.1
LAN SETUP :
Ethernet interface IP address 192.168.100.1 subnet-mask 255.255.255.224
NAT DHCP Server Pool Table :
NAT DHCP server support 20 IP pools
NAT DHCP server support 512 IP, Created 20 IP
Pool Index Begin IP
1 192.168.100.1 192.168.100.21
DNS server(1) 68.6.16.30
DHCP server lease time : 1800
IP Mapping Table:
Index Global IP
1 68.5.203.16 192.168.100.22
Port Mapping Table:
Index Port
1 21 192.168.100.23
nat static portmapping delete {index/all}
Remove the entry from the portmapping table
Example:
CM>nat static portmapping delete 1
Delete static portmapping index 1

NAT static ip

nat static ip {enable|disable|ipaddress}
Enable/disable NAT/PAT gateway function or assign global ip
Example:
CM>nat static ip disable
Static IP will be disabled after "reset" command.
50 User's Guide
End IP
Local IP
Local IP Protocol
ftp