Nat - Orion 3000 User Manual

Example:
CM>interface wireless ssid Ambit
Set SSID to Ambit
interface wireless host {host name}
Set Wireless LAN Cable Router Access Point host name
Example:
CM>interface wireless host Conference-Room
Set host to Conference-Room
interface wireless channel {1~11}
Set Wireless LAN Cable Router Access Point channel
Example:
CM>interface wireless channel 11
Set Channel to 11
interface wireless wep {64bits|128bits} key (xxxxxxxxxx|xxxxxxxxxxxxxxxxxx)
Set Wireless LAN Cable Router Access Point wep key
Example:
CM>interface wireless wep 64bits key 1122334455
Set Wireless LAN Cable Router Access Point 64bits wep key to 1122334455
interface wireless wep disable
Disable Wireless LAN Cable Router Access Point wep key

NAT

Network Address Translation/Port Address Translation (NAT/PAT) gateway is designed for IP
address simplification and conservation, as it enables private IP network that uses no registered IP
addresses to connect to the Internet. NAT/PAT operates on a wireless LAN cable modem,
connecting to Internet, and translates the private (not globally unique) addresses in the internal
network into legal addresses before packets are forwarded onto the Internet. As part of this
functionality, NAT can be configured to advertise only one address for the entire network to the
outside world. This provides additional security, effectively hiding the entire internal network
from the world behind that address. NAT has the dual functionality of security and address
conservation, and is typically implemented in remote access environments.
48 User's Guide