Water Connection - Bosch Maxx 1000 Instruction Manual And Installation Instructions

Water connection

Water supply
42
Caution
Operate the washing machine with cold drinking wa
ter only. Do not connect the appliance to the mixer
tap of an unpressurized hot water boiler.
If in any doubt, have the water connection carried out
by an authorized technician.
The water supply hose must not be:
q Bent or squashed.
q Modified or cut through (stability can no longer be
guaranteed).
Plastic threads must only be tightened by hand. Do
not remove the strainers from the water supply hose.
Observe the water pressure in the supply network:
q The water pressure should be between 1 ... and
10 bars (when the tap is turned on, at least 8 litres
of water is discharged per minute).
q A pressure reducing valve must be installed if the
maximum water pressure is exceeded.