Washing The Laundry - Bosch Electronic with tempature selector Operating Instructions And Installation

Washing the laundry

Selecting a wash programme
See the programme table below.
«Hard-wearing cottons» -
Heavily soiled whites, 90 ºC
Intensive wash programme for hard-wearing
cotton or linen items.
Stains / Intensive, 60 ºC
Energy-saving programme. The longest
washing cycle reduces energy consumption.
«Hard-wearing cottons» +
Whites and coloureds, hard-wearing
fabrics and colourfast, 60 ºC, with
pre-wash.
For heavily soiled laundry.
Coloureds, 30, 40, 60 ºC
Hard-wearing fabrics.
A
«Synthetics» -
Delicates, 30, 40, 60 ºC (synthetics)
For washing delicate cottons, synthetic or
mixed fibre fabrics.
«Woollens, delicates» -
Very delicate, 30 ºC
For washing very delicate cotton garments,
synthetic or mixed fibre fabrics, curtains. These
programmes have no spin cycle between
rinsing cycles.
6
Woollens, ,30 ºC, cold
For machine washable woollens or wool
mixtures.
Additional programmes
Rinse - r
Rinse cycle with low-energy spin. Can also be
used for delicate items.
4
Spin -
Extra spin cycle, washing or rinsing water is
pumped out before spinning the laundry.
Pumping (emptied) -
Pumps out the rinse water if «Rinse hold
5
C/
» has been selected. For careful washing
of delicate items.
16 en
y v
-
P
»
U J
-
b
Additional functions
Extra rinse r +
The programme carries out an extra rinse
cycle.
Rinse hold C
The laundry remains in the water after the final.
t
» Spin
Reduces the spin speed.
Starting a programme
Turn the programme selector to the
required wash programme.
The «Wash
flashes.
Selecting the required spin speed.
Ensures careful washing by automatically
limiting the maximum spin speed in the
«Delicates (synthetics)», «Very delicate» and
«Woollens» wash programmes.
Set to the required temperature using the
temperature selector.
Press the additional function button(s) to
activate them. The corresponding indicator
light comes on.
Press the «Start
The «Wash
comes on. The wash programme starts.
The «Wash
remains lit throughout the wash
programme selected.
The «Rinse r» indicator light comes on
during the «Rinse» programme.
Modifying a selected programme
If you have selected and started an incorrect
wash programme it can be corrected in the
following way:
Turn the programme selector to «Stop».
Set the programme selector to the position
for the required programme. The «Wash
/Ready
Press the «Start
The «Wash
comes on. The newly selected programme
starts.
9
/
d
/Ready » indicator light
» button
d
/Ready » indicator light
d
/Ready » indicator light
d
» indicator light flashes.
» button
d
/Ready » indicator light