First Washing Cycle - Bosch Electronic Operating Instructions And Installation

First washing cycle

14 en
Carry out the first wash without any laundry in the machine to
remove residual water left from testing the machine at the
factory.
m Check that the transport security devices have been removed
from at the back of the machine (refer to the removal
instructions for the machine).
m Open the water tap.
m Open the detergent drawer as far as it will go.
m Pour approximately one litre of water into chamber II of the
drawer
m Put standard detergent in chamber II using the measuring
cup. Never use detergent for delicate or woollen items
because it produces too much foam.
m Turn the programme selector to the right (clockwise) to the
«Cottons+Linens 90º C» programme. The «Wash/Ready»
indicator light flashes.
m Press the «Start» button. The programme starts and the
«Wash/Ready» indicator light stays on.
m When the programme has finished, the «Spin/End» indicator
light starts flashing. Set the programme selector to «Off»
and the light goes out.