Adjusting The Volume; Displaying Information - Grundig ELEGANCE 21 FLAT TVD 55-2502/5 TOP User Manual

TV
DVD
ZOOM
PROGRAM
GO TO
DVD MENU
z
DVD SETUP TITLE
TXT AV
UPDATE
SUB
d
DVD
VCR
EXT.
SAT
Tele Pilot 165 C
TELEVISION OPERATION
Switching on and off
1 Switch on the television by pressing the » « button on the tele-
vision set.
– The device switches to standby mode.
Switch the television on with »1...0« or »P+« or »P-«.
Press the » « button to switch the television to standby mode.
2
Press »1...0« or »P+« or »P-« to switch on the device from
standby mode.
– After switching on, the station preset of the TV Guide provider
is automatically selected. After a short time, the information
about the current and upcoming broadcast is displayed.
Completely switch the television off by pressing » « on the
3
television set.
– This saves electricity.
Selecting channels
Select channel positions directly with »1...0«.
1
Use »–/– –
2 Press »P+« or »P-« to move up and down channels.
Selecting AV channels
Use »AV« to select AV channels directly.
1

Adjusting the volume

1 Adjust the volume with
Muting
p
Use » « to switch the sound off (mute) and to switch it on
1
again.
Call up TV Guide and time.
After switching the station presets, information about the current
broadcast is displayed (TV Guide).
1 Call up information about the current and next broadcast by
pressing »
- The information and the time are briefly displayed.
Note:
If the message »No info« is displayed, switch to the channel
preset of the TV Guide provider by pressing »1...0« or »P+«
or »P-«. After a few minutes the new data will have been loa-
ded.

Displaying information

Press »UPDATE« to display the information.
1
– The display disappears automatically after a short while.
« to select two digit channel positions.
»– « or »
«.
___________________
+«.
13