Connection And Operation; Connection And Installation - Grundig RS-Set 2 User Manual

CONNECTION AND OPERATION

Connection and installation

Connecting the mains cable
1 Plug the mains cable into the
the device.
Insert the power cord plug in the socket.
2
For instructions on how to install the loudspeakers with a WT2 transmitter
3
please refer to the appropriate operating manual.
Switching on and operating after installation
1
Switch on both loudspeakers with »Z«.
– The orange indicators on the loudspeakers light up (stand-by).
2 Switch on the television.
– The green indicators on the loudspeakers light up (operation).
Note:
The loudspeakers switch on or to stand-by mode automatically depending
on control signals from the WT2.
The change to stand-by function depends on the audio source and can take
up to 30 minutes.
»230 V 50/60 Hz« socket on the back of
_____________
17