System Components - Grundig RS-Set 2 User Manual

SET-UP AND SAFETY
_________________________________________________________________
The wireless transmission system
Your loudspeakers are equipped with an HF system which enables them to trans-
mit and receive audio and data signals. Cables, with the exception of the mains
cable are no longer necessary.
The HF transmission strength is limited by national and international regulations
to prevent radio interference from neighbouring devices.
The HF transmission power of the whole system is < 10 mW. This guarantees an
unhindered reception range of approximately 100 m. This range is restricted
inside buildings, depending on the construction materials used.
Avoid placing the system near metal objects such as radiators or electrical devi-
ces such as cordless telephones which use radio signals.
Since the audio and data signals are not transmitted on an exclusive range we
cannot guarantee that this will not cause interference. To avoid interference you
can change the communication channel for the audio transmitter (WT2).
In some circumstances, people, walls and other surfaces can reflect radio sig-
nals. Reflected signals can mix with direct (non-reflected) signals thus causing a
type of interference known as multi-path reception. This can lead to noise or a
temporary loss of sound. If such interference does occur, simply move the louds-
peakers or change transmission channels.

System components

Your RS-Set 2 loudspeakers are only suitable for use with the WT2 wireless
transmitter (in conjunction with the GRUNDIG Lenaro television).
13