Selecting A Different Antenna; Omnidirectional Antenna - 3Com Wireless LAN 11 Mbps User Manual

11 mbps wireless lan
Table of Contents

Advertisement

Selecting A Different
Antenna
Model number
Design and type
Frequency Range
Gain
VSWR across band
Distance (coverage)*
Effective Radiated Power
(ERP) @ different power
transmission settings**
Temperature range
Dimensions (inches)
Weight
Cable
The standard detachable portable antenna supplied with the access point is a
multi-purpose antenna suitable for a variety of environments, including office
LANs, physical plants, and factory floors. If your site has special requirements that
might be served by different types of antenna, four optional antenna models are
available, as shown below:
3CWE490
Omnidirectional
(fiberglass)
2.400-2.4835 GHz
4 dBi
< 1.5:1
2100 feet
High:
159 mW
Medium: 50 mW
Low:
13 mW
-40 C to +80 C
10" (height)
5.34 oz.
A six-foot accessory cable (model 3CWE480) is required for each of these optional antennas. It
provides the transition from the SMA connector on the access point to the N-type connector
on the antenna. A 20-foot cable (model 3CWE481) is also available.
* Coverage varies depending on building construction.
** See "Setting Data Transmission Properties" on page 27 for information on selecting power
transmission levels.
You can order any of the optional antennas by model number from the 3Com
Web site.

Omnidirectional Antenna

The fiberglass omnidirectional
antenna (model number 3CWE490)
is designed for use in harsh indoor
environments. It can be centrally
located on the ceiling to provide
uniform coverage over a wide area.
This antenna features a built-in
matching network that eliminates
the need for a ground plane.
This antenna can be mounted on
the ceiling by means of a standard
ceiling-mount bracket. Before
installing, ensure that access is
available for cable routing.
This antenna does not have an electrical connection between the mask mount and
the coaxial cable shield. However, adding a lightning arrestor will correct this
situation by grounding the outer shield as recommended. Some arrestor designs
provide over-voltage protection for the signal sent down the cable. If you use such
3CWE492
3CWE497
Ceiling-mount
Ceiling-mount
omnidirectional
hallway
2300-2500 Mhz
2300-2500 Mhz
2.5 dBi
4 dBi
< 1.35:1
< 1.5:1
1800 feet
2100 feet
High:
112 mW
High:
Medium: 36 mW
Medium: 50 mW
Low:
9 mW
Low:
-40 C to +80 C
-40 C to +71 C
4.25 (diameter)
2.6 x 1.8 x 0.2
8 oz.
2 oz.

Selecting A Different Antenna

3CWE498
Directional Panel
(indoor/outdoor)
2300-2500 Mhz
8 dBi
< 1.5:1
3600 feet
159 mW
High:
Medium: 126 mW
13 mW
Low:
-40 C to +80 C
5.1 x 4.7 x 1.5
8 oz.
11
398 mW
32 mW

Advertisement

Table of Contents
loading

This manual is also suitable for:

3crwe80096aAccess point 8000

Table of Contents