Table of Contents
Advertisement
CONNECTED TV AND HOmE NETwORK
wired network settings
There are two ways of making the wired network
settings.
A Automatic wired network connection,
a ll connection settings (»IP Address«, »Net-
mask«, »Gateway« and »DNS«) are ob-
tained from modem automatically.
B Manual wired network connection,
a ll connection settings (»IP Address«, »Net-
mask«, »Gateway« and »DNS«) must be
configured manually.
Automatic wired network
connection
Most of the home networks are Dynamic. If you
have a dynamic network, you must use a DSL
modem that supports DHCP. A Television con-
nected to the same network with a Modem or
IP sharer that support DHCP obtains the »DNS«
values that are required for »IP Address«, »Net-
mask«, »Gateway« and internet access auto-
matically, and thus you are not required to enter
those values manually.
Note:
If you do not have a dynamic network, follow
7
the instructions in "Manual wired network
connection" section.
1 Select the line »Network« with »
and press »●« to confirm.
– T he »Settings > Network« menu appears.
Settings > Network
Wired
Wireless
Connection test
2 Select the line »Wired« with »
press »●« twice.
« or »
«
V
Λ
Automatic
Manual
Repair
« or »
« and
V
Λ
3 After your device is connected to the net-
work, the download bit rate is tested auto-
matically.
Confirm this message by pressing »●«.
4 Press »
« twice to end the setting.
x
manual wired network connection
Certain networks require Static IP address. If
your network requires a Static IP address, you
must enter the »IP Address«, »Subnet mask«,
»Gateway« and »DNS« values manually. You
can obtain your »IP Address«, »Subnet mask«,
»Gateway« and »DNS« values from your Inter-
net Service Provider (ISP) or copy them from a
computer connected to the same network by dis-
playing its network settings.
1 Select the line »Network« with »
and press »●« to confirm.
– T he »Settings > Network« menu appears.
2 Select the line »Wired« with »
press »●« to confirm.
3 Select the option »Manual« with »
and press »●« to confirm.
– T he »IP address« submenu appears.
Settings > Network
Wired
Wireless
Connection test
4 Enter the »IP address«:
Activate the first input position by pressing
»●« and select the first number with »
»
«.
Λ
Select the next digit position with »
press »●« to activate.
Repeat the procedure for all characters.
Select the push button »Next« with »
»
« and press »●« to confirm.
Λ
------------------------------
« or »
«
V
Λ
« or »
« and
V
Λ
« or »
«
V
Λ
IP address
0 1 0 . 1 3 4 . 1 5 3 . 0 7 4
Cancel
Next
« or
V
>
« and
« or
V
27
ENGLISH
Advertisement
Table of Contents
