Cassette Player Operation; Opening And Closing The Movable Display; Normal Play And Pause - Alpine TDM-7590R Owner's Manual

SOURCE

Cassette Player Operation

Opening and Closing the Movable
display
1
Press the c button.
The movable display will open.
(Movable display fully opened)
To close the movable display, press the c button
again.
The movable display will close.
N O T E S
• Do not apply shock to the movable display when it is
open as it may result in malfunction of the unit.
• The display may be dim during low temperatures
and immediately after turning on the power. The
brightness will return to normal as time elapses.
• The display will stop at the set angle when closing.
CAUTION
Keep hands (or any other object) away from the
display while it is opening or closing to avoid damage
or injury. The back of the movable display will get very
warm under normal operating conditions. This is not a
malfunction. Do not touch.

Normal Play and Pause

1
Press the c button.
The movable display will open.
Insert a cassette tape into the slot with
the open side facing right.
:/J
c
2
Insert a cassette (or press the source button to
switch from the tuner or CD Changer mode if a
cassette is already inside the tape player).
The player begins playback. The display shows
"TAPE" and " or
show the tape side being played. When the end
of the tape is reached, the unit automatically
stops and reverses the tape to play the other
side of the tape.
When a cassette is already inserted, press the
SOURCE button to switch to the TAPE mode.
The mode will change every time the button is
pressed.
→ TUNER → TAPE → CD CHANGER∗
(∗ Only when the CD changer is connected)
3
Press the :/J button to pause the tape playback.
The display shows "PAUSE."
Press again to resume the tape playback.
4
Press the c button to stop the tape play and
eject the cassette.
The tape-direction indicator disappears.
NOTES
• When power is turned off or the front panel is
removed, the full-logic mechanism will automatically
switch to the PAUSE mode. This protects the tape
from being deformed by the pinch-rollers if left for
long periods.
• Auto Metal
When a metal cassette tape is inserted, the player
automatically adjusts to the equalization for metal or
any other high bias tape for optimum sound.
• If the cassette tape does not eject, press the c button
again for at least 3 seconds.
Cassette
" during tape playback to
13
-EN
FR
ES
DE
IT
SE