Specifications - Alpine CDM-7861R Owner's Manual

Indication for CD Changer
HI TEMP
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature
returns to within operation range.
ERROR - 01
• Malfunction in the CD Changer.
- Consult your Alpine dealer. Press the magazine eject
button and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your
Alpine dealer.
• Magazine ejection not possible.
- Press the magazine eject button. If the magazine does
not eject, consult your Alpine dealer.
NO MAGZN
• No magazine is loaded into the CD Changer.
- Insert a magazine.
NO DISC
• No indicated disc.
- Choose another disc.

Specifications

FM TUNER SECTION
Tuning Range
Mono Usable Sensitivity
Alternate Channel Selectivity 80 dB
Signal-to-Noise Ratio
Stereo Separation
MW TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
LW TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
CD SECTION
Frequency Response
Wow & Flutter (% WRMS)
Total Harmonic Distortion
Dynamic Range
Signal-to-Noise Ratio
Channel Separation
GENERAL
Power Requirement
Maximum Power Output
Output Voltage
Bass
Treble
Weight
CHASSIS SIZE
Width
Height
Depth
NOSEPIECE SIZE
Width
Height
Depth
Due to continuous product improvement, specifications and
design are subject to change without notice.
87.5 – 108.0 MHz
0.7 V
65 dB
35 dB
531 – 1,602 kHz
25.1 V/28 dB
153 – 281 kHz
31.6 V/30 dB
5 – 20,000 Hz ( 1 dB)
Below measurable limits
0.008% (at 1 kHz)
95 dB (at 1 kHz)
105 dB
85 dB (at 1 kHz)
14.4 V DC
(11–16 V allowable)
44 W 4
2 V/10k ohms
14 dB at 60 Hz
14 dB at 10 kHz
1.5 kg (3 lbs. 5 oz)
178 mm (7")
50 mm (2")
155 mm (6-1/8")
170 mm (6–3/4")
46 mm (1-13/16")
19 mm (3/4")
15
-EN
FR
ES
DE
IT
SE